Passive Monitoring

Main application for ANTS PM are highlighted hereafter:

• Real-time network monitoring for quality assurance

• Supports CS & PS Core Network interfaces (ISUP, SIP, MAP, CAP, GTPv1 & GTPv2, Diameter…).

• Full end-to-end correlation with message decoding down to bit level

• Online, on-demand subscriber tracing

• Advanced user content analysis for PS (DPI based) and CS (voice waveform analysis) services

• Advanced RAN and shared RAN analysis (2G,3G,4G) based on signaling interfaces (A, Abis, Gb, Iu, Iub) and vendor traces processing

• Rich set of KPI’s, real-time alarming, xDR streaming

Telco Services: Support Transformation With Passive Monitoring And Advanced End-To-End Correlation

By automatically running defined tests according to your individually ANTS monitoring system enables real-time monitoring of all signalling messages transported over selected interfaces of the Mobile Telecommunication Network. Monitored messages are captured, decoded, analyzed and correlated with other messages at the various levels of signalling transactions. In addition, ANTS generates a rich set of statistics based directly on these messages from all the completed transactions. Access network for 2G up to 5G are supported as well.

ANTS PM Traffic Analyzer allows to efficiently investigate your network traffic:

• Visualise traffic metrics (volume, bytes/packets sent, etc.) over time

• Shows traffic distribution per nodes or per subscriber

• Optionally, displays also service/protocol distribution (DPI)

With the addition of the Passive Monitoring solution to its portfolio, ANTS provides an objective picture of the network functionalities and performances where the new architectures and technologies resulting from the advent of 5G are integrated.

Thanks to its modular design ANTS PM provides the solution for the following applications

Network Monitoring

Continuous optimization is a relevant part of network activities, particularly in today’s times when networks have dynamic configurations. The network capacity has to continuously change due to an ever-growing traffic demand and on different locations, network elements are regularly updated and coverage is extended.

Continuous optimization can be seen as a cyclic process involving data collection and data analytics:

• 600+ KPIs calculated for all major protocols.

• Daily, hourly, minute aggregation per network element, signalling relation, cell, TAC, etc.

• KPIs export & streaming.